eShop
概要
特徴
- PTFEの元々の疎水性をさらに高める加工を施しているため、ウェット、ドライのどちらの条件でも滅菌が可能
- 疎油性
- 高流量、低差圧
- 中心部材にPPを使用しているため、耐熱性と耐圧性が高い
- 繰り返しのSIP、オートクレーブが可能
アプリケーション
- 培養、貯槽タンクのベントフィルター
- 圧空、酸素、窒素の滅菌
- シングルユース製品へのアッセンブリー
Quality Control
- 出荷前完全性試験を100％実施
- フルトレーサビリティ
- ISO 9001承認工場での製造
製品性能
構成材料
| Membrane | Hydrophilic Polytetrafluoroethylene (PTFE) |
| Support | Polypropylene (PP) |
| Core/Cage/End Caps | Polypropylene (PP) |
| Cartridge End Cap Inserts | Polybutylene terephthalate (PBT) (Cartridge exclusive) |
| Cartrdige End Cap O-rings | Silicone / EPDM / Fluoroelastomer / PFA encapsulated O-rings |
| Capsule Housing | Polypropylene (PP) |
| Capsule Vent O-rings | Silicone |
| SP3 Capsule Port Insert | 316L Stainless Steel |
| SP3 Capsule Housing | Polyetherimide (PEI) |
| SP3 Capsule O-rings | Silicone |
ろ過面積
| Type | Effective Filtration Area |
| A-Standard Cartridge (10 inch) | 0.8 m² |
最大使用差圧
| A-Standard Cartridge | Capsule |
| Forward： 0.69 MPa @ 25 °C 0.40 MPa @ 60 °C 0.24 MPa @ 80 °C Reverse： 0.30 MPa @ 25 °C 0.10 MPa @ 80 °C |
Forward： 0.55 MPa @ 25 °C 0.10 MPa @ 80 °C Reverse： 0.21 MPa @ 25 °C |
Sterlilization
| Type | Sterilization |
| A - Standard Cartridge | Can be steam sterilized for 30 minutes at 145 °C in forward direction(＜30kPa) with 100 cycles plus in reverse direction(＜10kPa),
150 cycles in total. (< 30 kPa) Can be autoclaved 200 cycles for 30 minutes at 130°C |
| Capsule | Autoclavable Capsule Filter: Can be autoclaved 50 cycles for 30 min at 130 °C (Can not be steam sterilized in line) |
| Cleansteam bag sterile package: Pre-sterilized with autoclave for 30 minutes at 121°C |
* Notes: Gamma sterilized products cannot be re-sterilized with gamma irradiation or steam sterilization
規制対応＊
- USP<788> Particulate matter in large volume injectionに適合
- 21 CFR 210.3(b)(6) Non-fiber-releasing filterに適合
- ASTM F838 107 cfu/cm2 Brevundimonas diminuta (ATCC 19146)に適合
- USP <85> Limulus Amebocyte Lysate (LAL)の0.25EU/ml未満に適合
- USP <87> In Vitro Biological Reactivity Testに適合
- USP <88> Biological Reactivity Test for Class V-121 °C plasticsに適合
- FDA 21 CFR177-18 indirect food additive requirementsに適合
- 動物由来成分不使用
ご注文情報
Filter Cartridge
| Cartridge Format | Membrane Type | Length | End Cap | O-ring Material | Industry |
| A Standard Cartridge | AFBB 0.2μm | 02 2.5 inch | 0 DOE | S Silicone | P |
| 05 5 inch | 2 226 / Flat | E EPDM | |||
| 10 10 inch | 7 226 / Fin | V Fluoroelastomer | |||
| 20 20 inch | 3 222 / Flat | P FEP/PFA encapsulated O-rings | |||
| 30 30 inch | 8 222 / Fin | ||||
| 40 40 inch | 6 222/3-Flange bayonet/Fin |
Bricap C Series Capsule Filter
| Housing Type | Capsule Format | Inlet/Outlet | Membrane Type | Sterilization | Package | Industry |
| Blank Standard | C01 | T 19 mm(3/4'') Sanitary Flange | AFBB 0.2μm | A Autoclavable | 1 1/pk | P |
| K Transparent | C02 | K 14 mm (9/16") Sanitary Flange | C Sterile Package | |||
| C03 | F 31 mm (1 1/4") Sanitary Flange | |||||
| V 14 mm (9/16") Hose Barb | ||||||
| H 13 mm (1/2") Hose Barb | ||||||
| Y 9.6 mm (3/8") Hose Barb | ||||||
| L 3.2 mm (1/8") Hose Barb | ||||||
| B 6-13 mm (1/4"-1/2") Stepped Hose Barb (No Filling Bell) | ||||||
| A 6-13 mm (1/4"-1/2") Stepped Hose Barb with Filling Bell (Outlet Only) |
Bricap L Series Capsule Filter
| Housing Type | Capsule Format | Inlet/Out | Membrane Type | Sterilization | Package | Industry |
| Blank Standard | L02 | S 38 mm (1 1/2") Sanitary Flange | AFBB 0.2μm | A Autoclavable | 1 1/pk | P |
| K Transparent | L03 | T 19 mm (3/4") Sanitary Flange | C Sterile Package | |||
| L05 | K 14 mm (9/16") Sanitary Flange | |||||
| L10 | D 25 mm (1") Hose Barb | |||||
| L20 | M 19 mm (3/4") Hose Barb | |||||
| L30 | X 16 mm (5/8") Hose Barb | |||||
| V 14 mm (9/16") Hose Barb | ||||||
| H 13 mm (1/2") Hose Barb | ||||||
| Y 9.6 mm (3/8") Hose Barb |
Bricap T Series Capsule Filter
| Capsule Format | Inlet/Outlet | Gauge Port Type | Membrane Type | Sterilization | Package | Industry |
| T10 | SS 38 mm (1 1/2") Sanitary Flange Inlet & Outlet | S 38 mm (1 1/2") Sanitary Flange |
AFBB 0.2μm | A Autoclavable | 1 1/pk | P |
| T20 | SM 38 mm (1 1/2") Sanitary Flange Inlet & 19 mm (3/4") Hose Barb Outlet | T 19mm (3/4") Sanitary Flange | C Sterile Package | |||
| T30 | N Without Gauge Port |
Brisip SP3 Series Capsule Filter
| Capsule Format | Inlet/Outlet | Membrane Type | Vent and Drain Valves | Package | Industry |
| SP3 | S 38 mm (1 1/2") Sanitary Flange | AFBB 0.2μm | P Both using 6 mm hose barb | 1 1/pk | P |
| X Vent valve using quick coupling (compatible with Stäubli connector), and drain valve using 6 mm hose barb |
|||||
| T Both using quick coupling (compatible with Stäubli connector) | |||||
| V Both using 13 mm (1/2") sanitary flange |
*Example：AAFBB020SP (Standard Cartridge，Safesure AFB 0.2µm，2.5 inch，DOE，Silicone，Pharmaceutical Grade)